hp9010 bios KO

[Horváth Péter]

The BIOS can be recovered if the flash memory is corrupted. Flash memory 
corruption can occur if the notebook powers down while the BIOS is being 
updated.
When the notebook is turned on, the boot block portion of the flash 
memory performs an integrity check on the rest of the BIOS image and 
enters recovery mode if the image is corrupt.
BIOS recovery can be forced on a non-functioning notebook by turning on 
the notebook while pressing and holding the Windows logo key+ (plus) * 
B* key on the non-functioning notebook keyboard until the caps lock 
light blinks.
To recover the BIOS:

   1.
      If the non-functioning notebook is docked in an optional docking
      device, undock the notebook.
   2.
      Attach the USB diskette drive directly to a USB port on the
      non-functioning notebook. (USB hubs are not supported for BIOS
      recovery).
   3.
      Insert the correct ROMPaq diskette for the product being updated.
      The BIOS image file must be located in the root directory of the
      diskette and must be in contiguous sectors. The easiest way to
      ensure this is to visit www.hp.com <http://www.hp.com> , download
      the Softpaq, and let the Softpaq create the ROMPaq diskette.
   4.
      Press and hold the Windows logo key + (plus)* B* key on the
      notebook keyboard (do not use an external keyboard) and turn on
      the notebook and wait for the caps lock light to start blinking.
   5.
      Release the Windows logo key + (plus)* B* .

The BIOS recovery procedure takes approximately one minute to read the 
image from the diskette, and then an additional 15 seconds to program 
the image into flash memory. The notebook restarts when the BIOS 
recovery procedure is complete. Do not attempt to turn off the notebook 
after starting a recovery.
If the BIOS recovery procedure stalls, the caps lock light will begin 
blinking. This situation can arise if the diskette is corrupt or the 
incorrect ROMPaq is used. If the notebook does not restart after 
approximately 3 minutes, press and hold the power button, or slide and 
hold the power switch, for at least 5 seconds to force the notebook to 
turn itself off. Then repeat the BIOS recovery procedure.

Ez mondjuk nem pont arra a típusra vonatkozik, de hasonlóra:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=130&prodSeriesId=471753&prodTypeId=321957&objectID=c00395630



Vojcsek Csaba írta:
> Sziazstok,
> sejtem a valaszt, de hatha van valakinek otlete
> hozzam kerult egy hp 9010 -es laptop, meghozza oylan problemaval, hogy
> bios frissites kozben "elszallt".
> bekapcs utan semmi... zug es kesz.
> van valami otlete valakinek hogy hoygan lehetne eletre lehelni?
> vagy veszelyes hulladekkent adjam le :S
>
> vcs
>
>
>   
> ------------------------------------------------------------------------
>
> _______________________________________________
> Techinfo mailing list
> Techinfo at lista.sulinet.hu
> http://lista.sulinet.hu/mailman/listinfo/techinfo
> Illemtan: http://www.1let.hu/illemtan.html
> Ügyfélszolgálat FAQ: http://www.kozhalo2.hu/Faq.aspx
>   

--------- következő rész ---------
Egy csatolt HTML állomány át lett konvertálva...
URL: http://lista.sulinet.hu/pipermail/techinfo/attachments/20080929/44c07710/attachment.html